Aluminum Bubble Foil Heat Reflective Insulation Sheets for roof
floor an dwall
The product consists of three layers of aluminum foil with plastic
bubble laminated between the aluminum foil,provides excellent
insulation: Reflects up to 97% of radiant energy in addition to
resisting other types of heat transfer from conduction, convection
and radiation. The two side aluminum foil forms an effective
barrier against moisture, air currents and vapors.
It is an economical solution for a wide range of industrial,
manufacturing and consumer applications.
|Main Material||Alu + (single / double) PE bubble + Alu|
|Other Material Structure||MPET + (single / double) PE bubble|
MPET + (single / double) PE bubble + MPET
Alu + (single / double) PE bubble
Alu + (single / double) PE bubble + Alu
Alu + woven + (single / double) PE bubble + Alu
Alu + woven + (single / double) PE bubble + woven + Alu
Alu + woven + (single / double) PE bubble + Alu + Anti-glare
coating Alu + (single / double) PE bubble + woven + Alu +
|Air Bubble Size||¢ : 10mm, H: 2.5mm; ¢ : 10mm, H: 4mm; ¢ : 10mm, H: 6mm; ¢ : 20mm,
H: 7mm; ¢ : 25mm, H: 8mm; ¢ : 25mm, H: 10mm|
|Coating Color||Blue, Green, Pink, Orange or customized|
|MPET/ Al Foil Thickness:||12micron/7 micron|
|Normal Roll size:||1.2m *30m/roll ; 1.2m *40m/roll; 1.35m *22.25m/roll; can be
|Packing:||1 roll/ clear plastic bag or customized logo printing packing bag
|Material Structure: AL/Bubble/AL|
|Bubble Size:D10mm*H 4mm(10*2.5/10*4/10*6/20*7/25*10)choose the bubble size|
|Roll Width:1.2m (lenth can be customized)|
|Water Vapour Transmission||0.013||g/M2kpa|
Installation methods and Installation Projects:
- Measure the metal roof to determine the amount of bubble foil wrap
insulation required for the project. Purchase approximately 10 to
15 percent more product than required to account for overlapping
and to provide the proper air gap between the purlins -- the
horizontal lengths of wood that support the roof panels between the
- Cover the metal roof purlins with double-sided adhesive tape.
Unroll the foil wrap insulation and attach it to the first purlin.
Continue to unroll the foil insulation and attach it the remaining
purlins, paying attention to allow the insulation to sag at least 1
inch between the horizontal members. The sagging provides an air
gap that raises the insulation’s efficiency.
- Continue to attach the Aluminum foil bubble insulation to the metal
roofing purloins, overlapping the adjoining sheets 2 inches as you
go. This is a temporary hold to keep the bubble foil wrap in place
while you prepare the next step.
- Secure the bubble foil to the framing members with furring strips.
Attach the furring strips perpendicular to the purloins every 24
inches to the framing members with 2-inch metal screws, paying
attention to not disrupt the insulation’s sagging. Use a drill
equipped with a screwdriver bit to drive the screws into the
- Cover the seams of the bubble insulation with foil tape.
buildings,Duct wrappings,Container liner,Sun-stop cover and
1. Thermal insulation and light inflecting in the constrction and
protection for both cold winter and water piper
2. Separation of refrigerator,warm keeping for center
air-conditioned,refrigerator and other home appliances
3. Thermal insulation,sound absorption and noise reduction for car
,train, refrigerator car and laboratory, moisture proof cushion for
Building insulation material for construction is a brand new heat
insulation product manufactured of polyethylene bubble/foam sheet
faced with aluminium foil on the one or two sides. It can reflect
97% radiant heat and reduces energy costs used in winter heating
and summer cooling. Reflective Foil thermal insulation is only a
few millimeters thick, its two sides of aluminium foil reflects
more than 97% thermal energy that reaches it .In summer, almost all
the sunlight and heat is bounced back into the air, Keeping the
heat out of the air conditioned building. In winter, Almost all the
heat generated inside the building is retained. Also, The
bubble/foam sheet in between the aluminium foil offer thousands of
empety air cells, which makes the heat more difficult to pass
through.1) Thickness: 0.017-0.03MM
2) Width: 300MM 450MM 500MM
3) Length: as your request
4) Color: transparent/clear,black,green,and so on
5) Net weight: on buyer's option
6) Packing: cartons or pallets.
1.100% New material and accept sample order.
2.Excellence and beautiful, the high grade product.
3.Easy to be pulled out and cut.
4. Transparency and no drape and even thickness.
5. Easy to use, can be recycled.
PVA water soluble film
100% new raw material, LDPE , UV resistance
Thickness: 12 mic --50mic --300 mic .
Colour: Transparent, Black, Red, Blue, Green, etc.
The main products of the company are polyvinyl alcohol (PVA)
materials, films and bags etc. We have manufactured a series of
products of water-soluble PVA bags for various uses.It could be
processed according to customers demand of any size and
specification.the water-soluble PVA bags are divided into the inner
packing bags and the outer packing bags. Their characteristics are
1,It will dissolve competely under the normal water
temperature(20±5℃) after 5-18 sec.
2,Its final products are CO2 and h3O, non-toxic and non-pollution;
3,The inner packing bags can dissolve completely above 3 ℃, while
the outer packing bags can issolve completely above 80 ℃.
4,Printing can be done on both the inner packing bags and the outer
packing bags, with clear handwriting, and oil ink and bags will
5 The water-soluble bag has no static electricity, h3 stretching
intensity and even tensity .
6,The inner packing bags has heat sealing or tying with the
water-soluble rope, while the outer packing bags can have nylon
string and self-adhesive foil.
7,The size of water-soluble packing bags can range freely between
8,Can be weighted exactly, no waste.
Food Grade POF shrinkable label Shrink Film
Product Name: Polyolefin POF Heat Shrink Wrap Film
Material: PP + PE
Shrinkage ratio: over 60%
Thickness: 12.5micron (50gauge), 15micron (60gauge), 19micron
(75gauga), 25micron (100gauge)
Roll width: 200mm (8") to 1600mm (80")
Roll length: 800m to 1600m for center-folded, 1600m to 3200m for
for standard sizes, please refer to the SPECIFICATIONS below
Type: single wound, corner folded (also called center-folded,),
Length (Single Wound)
Length (Center Fold)
Packaging Details :
Bags or film rolling on the 3" paper core ,With film bag covered on
each sides of core with plastic cap
All rolls loading on plastic pallet (1300*1100*150mm)
For container loading ,suggest use gusseted fold type
FCL container or LCL container,by sea or by air
20 days after receiving the deposit payment
12mic 19mic heat shrink Perforation POF Shrink film
1. Shrink film thickness and width:
Thickness:10mic, 12.5mic, 15mic, 19mic, 25mic and 30mic etc.
2. Shrink film grade:
Can be divided into normal grade, medical grade, high strength
Can be made of tubular film, L-type fold film and single film,
Can be processed into tube bags, flat pockets, ladder bags, round
bags and so on.
POF Shrink film FEATURES
Cast film, high clarity and shrink rates at transverse direction,
well distributed thickness, anti-static treatment for increasing
printing and labeling speed.
-Suitable for a broad range of applications: tamper evident seals,
Pre-forms, and full body sleeve labels.
-Low shrink initiation temperature.
-Long shell life at recommended storage temperatures.
-Excellent for printing high quality graphics.
-Ideal for high speed applications.
-Can be printed without surface treatment.
-Lighter and more cost effcient than tranditional packaging.
sinlg would length
center folded length
POF film type
POF film: Center-fold/Single wound/POF shrink bags,Printing on
film,Cross-linked film,Anti-fog film,Micro-perforated
film,Pre-perforated film etc
POF package shrink film application:
The POF shrink films are used for labeling and packing products in
-Food & beverage industries: Mineral Water, Soft Drinks,
Liquors, Pickles, Jams, Jellies, Fruit Juices, Tea, Coffee,Spices,
Ghee, Edible Oils etc. in Bottles / Cans / Jars
-Printing & Pack